China wholesaler etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV) air compressor repair near me

Product Description

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

 

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request

2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide

3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment. 

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential. 

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

 

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)

European/ Middle Eastern/ African Market: Echo Lok (Ms.)

American Market: Alice Kwok (Ms.)
 

 
     

After-sales Service: Yes
Warranty: Yes
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Customization:
Available

|

air compressor

How Do You Ensure the Air Quality Produced by Oil-Free Compressors?

Ensuring the air quality produced by oil-free compressors involves a combination of factors, including proper equipment selection, appropriate maintenance practices, and adherence to industry standards. Here’s a detailed explanation of how to ensure the air quality produced by oil-free compressors:

1. Equipment Selection:

Choosing the right oil-free compressor is the first step in ensuring air quality. It is essential to select a compressor that is specifically designed for applications requiring clean air, such as food and beverage processing, pharmaceutical manufacturing, electronics assembly, and medical facilities. Consideration should be given to the compressor’s filtration capabilities, air treatment options, and compliance with relevant industry standards and regulations.

2. Filtration Systems:

The filtration systems integrated into oil-free compressors play a crucial role in maintaining air quality. These systems typically include pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, coalescing filters capture smaller particles and coalesce water vapor, and activated carbon filters absorb odors and remaining oil vapors. Regular inspection and replacement of filters are necessary to ensure their effectiveness in removing contaminants from the compressed air.

3. Regular Maintenance:

Regular maintenance is key to preserving air quality. This includes following the manufacturer’s recommended maintenance schedule, which may involve tasks such as filter replacement, lubrication of non-compressed parts, and inspection of seals and gaskets. Proper maintenance helps prevent air leaks, ensures the compressor operates efficiently, and reduces the risk of contamination.

4. Air Quality Testing:

Periodic air quality testing is essential to verify the effectiveness of the oil-free compressor and its filtration system. Air quality testing can involve measuring parameters such as oil content, particulate matter, moisture levels, and microbiological contamination. By conducting regular air quality tests, any deviations from the desired air quality standards can be identified, allowing for corrective actions to be taken promptly.

5. Compliance with Standards:

Adhering to industry standards and regulations is crucial in ensuring air quality. Standards such as ISO 8573 specify the acceptable limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Compressors should be selected, installed, and operated in accordance with these standards. Regular auditing and certification processes can help ensure ongoing compliance and provide assurance of air quality to stakeholders.

6. Training and Education:

Proper training and education of personnel involved in the operation and maintenance of oil-free compressors are vital. Operators should be familiar with the specific requirements of oil-free compressors, including the importance of filtration, maintenance procedures, and recognizing signs of potential issues. Training programs can help ensure that operators have the necessary knowledge and skills to maintain air quality effectively.

By considering equipment selection, implementing robust filtration systems, conducting regular maintenance, performing air quality testing, complying with standards, and providing appropriate training, the air quality produced by oil-free compressors can be effectively ensured. These measures are essential for applications where air purity is critical, safeguarding product integrity, process efficiency, and the health and safety of personnel.

air compressor

Can Oil-Free Air Compressors Be Used in Cold Climates?

Yes, oil-free air compressors can be used in cold climates. Here’s a detailed explanation of the considerations and adaptations that may be necessary when using oil-free compressors in cold weather:

1. Cold-Start Capability:

Oil-free compressors should be designed and equipped with features that enable them to start and operate reliably in cold temperatures. This includes components such as low-temperature lubricants, preheating systems, and specialized insulation to prevent freezing or damage to critical parts.

2. Compressed Air Drying:

In cold climates, the moisture content in the compressed air can condense and freeze, leading to operational issues and potential damage to the compressed air system. It is crucial to incorporate proper compressed air drying equipment, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air and prevent freezing within the system. This ensures the production of dry and reliable compressed air even in cold weather conditions.

3. Freeze Protection:

Special attention should be given to protecting the compressor and associated components from freezing. This may involve insulation, heat tracing, or the use of frost protection heaters in critical areas susceptible to freezing, such as air intakes, valves, filters, and condensate drains. Adequate insulation can help maintain optimal operating temperatures and prevent freezing-related issues.

4. Cold Weather Lubricants:

In extremely cold climates, it is essential to use specific lubricants that are designed to perform effectively at low temperatures. These lubricants should have low pour points and be capable of providing sufficient lubrication and protection to the compressor’s moving parts even in cold environments. Using the appropriate lubricants ensures reliable operation and prevents damage to the compressor during cold starts and operation.

5. Preventive Maintenance:

Regular preventive maintenance is crucial when using oil-free compressors in cold climates. It is essential to follow the manufacturer’s recommendations for maintenance tasks such as filter replacements, lubricant changes (if applicable), and inspection of critical components. Cold weather conditions can exacerbate wear and tear on equipment, so proper maintenance helps identify and address potential issues before they lead to operational problems.

6. Monitoring and Control:

Implementing advanced monitoring and control systems can provide real-time information about the compressor’s performance in cold climates. Monitoring parameters such as temperature, pressure, and system efficiency can help identify any deviations or potential issues caused by low temperatures. Additionally, control systems can optimize compressor operation and adjust parameters to ensure efficient performance in cold weather conditions.

It’s important to consult the manufacturer’s specifications and guidelines for the specific oil-free compressor model being used, as they may provide additional recommendations or requirements for operating the compressor in cold climates. Adhering to these guidelines and implementing appropriate adaptations will help ensure the reliable and efficient performance of oil-free air compressors in cold weather environments.

air compressor

What Industries Commonly Use Oil-Free Air Compressors?

Oil-free air compressors are utilized in various industries where clean and oil-free compressed air is essential for specific applications. These industries rely on oil-free compressors to ensure product quality, maintain equipment integrity, and meet industry regulations. Here’s a detailed explanation of the industries commonly using oil-free air compressors:

1. Food and Beverage:

The food and beverage industry extensively employs oil-free air compressors. These compressors are used in processes such as food packaging, filling, bottling, and product drying. Oil-free compressors prevent oil contamination, ensuring product quality, food safety, and compliance with industry regulations. They help maintain the freshness of food products, prevent flavor or odor contamination, and minimize the risk of product spoilage.

2. Pharmaceutical and Healthcare:

In the pharmaceutical and healthcare sectors, oil-free air compressors are vital for maintaining the purity and integrity of medical gases, powering respiratory devices, and supporting laboratory applications. Oil-free compressors deliver clean and uncontaminated compressed air for critical processes, such as ventilators, nebulizers, surgical instruments, dental tools, and laboratory testing. They ensure patient safety, regulatory compliance, and reliable operation in these sensitive environments.

3. Electronics and Semiconductor:

The electronics and semiconductor industries require oil-free air compressors for various applications. These compressors are used in cleanrooms and manufacturing processes where air quality is crucial to prevent contamination of sensitive electronic components. Oil-free compressors provide clean and dry compressed air for applications like chip manufacturing, circuit board assembly, and air knife systems. They help ensure the reliability and quality of electronic products while minimizing the risk of particle contamination.

4. Automotive and Aerospace:

In the automotive and aerospace industries, oil-free air compressors are utilized for painting, coating, and pneumatic tools. These compressors deliver clean, oil-free compressed air, ensuring high-quality finishes and preventing oil contamination that could affect adhesion or cause defects. Oil-free compressors play a critical role in maintaining the precision and reliability of pneumatic tools used in assembly lines, manufacturing processes, and aircraft maintenance.

5. Textile and Garment:

The textile and garment industries rely on oil-free air compressors for various applications, including powering pneumatic tools, air agitation in dyeing processes, and providing clean compressed air for textile manufacturing. Oil-free compressors prevent oil contamination that could stain or damage fabrics, ensuring product quality and minimizing the risk of production defects. They help maintain efficiency and reliability in textile production while meeting strict quality standards.

6. Chemical and Petrochemical:

The chemical and petrochemical industries utilize oil-free air compressors in critical processes where air purity is essential. These compressors are used in applications such as air sparging, pneumatic conveying, and instrument air supply. Oil-free compressors ensure that the compressed air does not introduce contaminants, ensuring the integrity of chemical reactions, preventing product contamination, and maintaining the safety of equipment and personnel.

7. Research and Laboratories:

Research facilities and laboratories across various industries rely on oil-free air compressors for a wide range of applications. These include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressors provide clean and reliable compressed air, ensuring accurate test results, preventing contamination, and maintaining the integrity of samples and experiments.

It’s important to note that while these industries commonly use oil-free air compressors, the specific requirements may vary based on the application and industry standards. Selecting the appropriate oil-free compressor and adhering to recommended maintenance practices are crucial to achieve optimal performance and meet industry-specific needs.

China wholesaler etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV)   air compressor repair near meChina wholesaler etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV)   air compressor repair near me
editor by CX 2023-09-26