China manufacturer Industrial Oil Free Small Silent Rotary Screw Air Compressor manufacturer

Product Description

COMPANY PROFILE

KY-200KYG Air Compressor (can be customized) :

GENERAL FEATURES:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or replacement, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building materials, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption equipment, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
SPECIAL FEATURES:
1,AIR PRESSURE STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start; on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
2,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This impact is not only on the grid, the impact of the entire mechanical system, but also greatly reduced.
3,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
4,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the generation of power, frequeucy conversion drive can show its advantages.
5,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the fan is also driven by frequency conversion, can significantly reduce the nosie of air compressor work.

TECHNICAL PARAMETERS:

Model Power Pressure
(Mpa)
 
Air flow Noise Stage Exit pipe diameter
 
Weight
(KG)
Dimensions
(mm(LxWxH)
 
PE-10AVF 7.5 8 1.0 60±2
 
Single grade
 
3/4
 
280 1000*600*100
10 0.8
PE-20AVF   8 2.2 60±2
 
Single grade
 
1 480 1150*800*1280
10 1.8
PE-30AVF 22 8 3.8 62±2
 
Single grade
 
11/4
 
520 1150*800*1280
10 3.0
PE-40AVF 30 8 5.0
 
63±2 Single grade
 
11/4
 
550 1150*800*1280
10 4.4
PE-50AVF 37 8 6.8
 
63±2 Single grade
 
11/2
 
650 1300*1000*1450
10 5.4
PE-60AVF 45 8 8.0
 
65±2 Single grade
 
11/2
 
750 1300*1000*1450
10 6.8
PE-75AVF   8 9.7 65±2 Single grade
 
2 1200 1700*1270*1500
  10 8.6
PE-100AVF 75 8 13.2 65±2 Single grade
 
2 1350 1700*1270*1500
10 16.1

ENERGY-SAVING EFFECT OF TWO-STAGE COMPRESSION:

According to the engineering thermodynamics theory, it is the most economical for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Energy-saving advantages:
1,To reduce the bearing load, and improve the volumetric efficincy;
2,In the case of partial load operation, it can improve efficiency and become energy saving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-25% than that of the one-stage air compressor, which can save the considerable electricity fees every year.

About shipping

Why choose us?

FAQ:

1.Q:What do you need machine and quotation?

A: According to capacity and factory size ,we can give you details.

2.Q: Are you trading company or manufacturer ?

A:We are factory.

3.Q:How do we pack machine?

  A:Exporting wooden cases

4.Q:Lead time

A:Around 25-30 days after the receipt of your deposit.

 

Type: High Pressure Gun
Usage: Paint Spray Gun, Washing Gun, Hopper Gun, Garden Gun
Working Style: Rotary Type
Air Wrench Type: Pulse pneumatic wrench
Pneumatic Drill Range: Tunnel
Degree of Automation: Automatic
Customization:
Available

|

air compressor

What Maintenance Is Required for Oil-Free Air Compressors?

Maintaining oil-free air compressors is crucial to ensure their optimal performance, reliability, and longevity. While oil-free compressors have lower maintenance requirements compared to oil-lubricated compressors, regular maintenance tasks are still necessary. Here’s a detailed explanation of the maintenance required for oil-free air compressors:

1. Regular Filter Replacements:

Oil-free air compressors have filters that help remove contaminants from the intake air. These filters should be regularly inspected and replaced as recommended by the manufacturer. Filters can become clogged over time, affecting the compressor’s efficiency and potentially increasing the risk of contaminants entering the compressed air stream. Regular filter replacements ensure proper air filtration and help maintain the desired level of air purity.

2. Condensate Drainage:

Oil-free compressors produce condensate, which is a mixture of water and oil-free compressed air. Proper condensate drainage is essential to prevent water buildup in the system, which can lead to corrosion and damage. Most oil-free compressors have automatic condensate drains that remove accumulated condensate. It’s important to regularly check and maintain these drains to ensure they are functioning correctly and prevent any blockages or leaks.

3. Inspection of Air Hoses and Connections:

Regularly inspecting air hoses, fittings, and connections is important to identify any leaks or damage. Leaks can lead to air pressure loss, reduced compressor efficiency, and increased energy consumption. Damaged hoses or connections should be repaired or replaced promptly to maintain the integrity of the compressed air system. Regular inspections can help identify potential issues early on and prevent costly breakdowns or inefficiencies.

4. Monitoring Air Pressure and Temperature:

Monitoring the air pressure and temperature of the compressor system is crucial for identifying any abnormalities or deviations from the desired operating parameters. Most oil-free compressors have built-in pressure and temperature sensors that provide real-time data. Regularly checking and recording this data can help detect any potential issues, such as pressure drops, abnormal temperature increases, or excessive cycling. If any abnormalities are detected, they should be investigated and addressed promptly to prevent further damage to the compressor.

5. General System Checks:

Performing general system checks on a regular basis helps ensure that all components of the oil-free air compressor are functioning properly. This includes inspecting the compressor motor, cooling fans, belts, and electrical connections. Any signs of wear, damage, or abnormal noise should be addressed promptly. Additionally, checking the compressor for any signs of oil contamination or unusual odors can help identify potential issues with the compressor system.

6. Manufacturer’s Recommendations:

It’s essential to follow the manufacturer’s recommended maintenance schedule and guidelines for the specific oil-free air compressor model. The manufacturer’s recommendations may include additional maintenance tasks specific to the compressor’s design and components. Adhering to these guidelines ensures that the compressor is properly maintained and can help prevent warranty issues.

Regular and proactive maintenance of oil-free air compressors is essential to ensure their reliable and efficient operation. Following the recommended maintenance tasks, monitoring system parameters, and promptly addressing any issues that arise can help extend the compressor’s lifespan, reduce the risk of breakdowns, and maintain the desired air quality for the intended applications.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

Are Oil-Free Air Compressors More Environmentally Friendly?

Oil-free air compressors are considered more environmentally friendly compared to oil-lubricated air compressors. These compressors offer several features and advantages that contribute to their eco-friendly nature. Here’s a detailed explanation of why oil-free air compressors are considered more environmentally friendly:

1. Elimination of Oil Contamination:

One of the significant environmental benefits of oil-free air compressors is the elimination of oil contamination in the compressed air system. Oil-lubricated compressors require oil for lubrication, which can potentially leak or contaminate the compressed air. Oil contamination can have adverse effects on downstream equipment, processes, and the environment. In contrast, oil-free air compressors operate without oil, ensuring clean, oil-free compressed air and eliminating the risk of oil contamination.

2. Reduction of Oil Spills and Leaks:

Oil-lubricated compressors have a higher risk of oil spills or leaks due to the presence of lubricating oil in the system. Oil spills can have severe environmental consequences, polluting soil, water bodies, and ecosystems. Oil-free air compressors eliminate the risk of oil spills or leaks, as there is no oil used in the compression process. This reduces the potential harm to the environment and minimizes the need for costly cleanup efforts.

3. Energy Efficiency:

Oil-free air compressors can be more energy-efficient compared to oil-lubricated compressors. The absence of oil in the compression chamber reduces internal friction and mechanical losses, resulting in improved energy efficiency. Energy-efficient compressors consume less electricity, leading to reduced energy consumption and lower greenhouse gas emissions. By using oil-free compressors, businesses can contribute to energy conservation and environmental sustainability.

4. Lower Environmental Footprint:

Due to the elimination of oil-related maintenance tasks, such as oil filtration, oil changes, and oil disposal, oil-free compressors have a lower environmental footprint. These maintenance activities associated with oil-lubricated compressors require the use of resources and generate waste, including used oil and oil filters. By using oil-free compressors, the consumption of resources and the generation of hazardous waste are reduced, contributing to a more sustainable and environmentally friendly operation.

5. No Oil Contamination in Air Tools and Products:

Oil contamination in compressed air can have detrimental effects on air tools, pneumatic equipment, and end products. Oil-free air compressors ensure that the compressed air delivered to these devices is clean and oil-free. This helps maintain the performance and longevity of air tools and prevents oil-related product defects. By using oil-free compressors, businesses can avoid costly repairs or replacements of equipment and minimize the risk of producing non-conforming or defective products.

It’s important to note that while oil-free air compressors offer environmental advantages, they may have certain limitations and considerations. These include the need for specialized maintenance, potential higher operating temperatures, and reduced maximum operating pressures compared to oil-lubricated compressors. Therefore, it’s essential to evaluate the specific requirements of the application and consider the trade-offs between environmental benefits and operational considerations when choosing an air compressor.

China manufacturer Industrial Oil Free Small Silent Rotary Screw Air Compressor   manufacturer China manufacturer Industrial Oil Free Small Silent Rotary Screw Air Compressor   manufacturer
editor by CX 2023-10-06