China factory 2000W*4 200L Oil-Free Silent 4-Piston AC DC Electric Portable Oil-Free Industrial Air Compressor wholesaler

Product Description

Product Description

Oil-free compressor is a special type of compressor whose main feature is that it does not use lubricating oil or oil seals during operation. These compressors are often used in special applications where the lubricant may adversely affect product quality or the environment.
Advantages of oil-free compressor:
Environmentally friendly: Oil-free compressors do not require the use of lubricating oil, so there is no lubricating oil waste or pollution. This helps reduce negative impact on the environment.

No oil pollution: The gas produced by oil-free compressors does not contain oil and is suitable for applications that require high gas purity, such as the food and pharmaceutical industries.

Low maintenance costs: Since oil-free compressors do not require regular lubricant changes or oil seal maintenance, their maintenance costs are relatively low.

Improve production efficiency: Oil-free compressors operate stably without having to worry about lubricant replacement or leakage issues, which helps improve production efficiency.

Avoid problems caused by lubricants: In some applications, lubricants can cause product contamination or adversely affect equipment. Oil-free compressors can avoid these problems.

Detailed Photos

Product Parameters

Model

Power(w)

Voltage(v)

Rotating speed(r/min)

Exhaust volume(m³/min)

Maximum air pressure(map)

Volume(L)

weight(kg)

size(mm)

1490w-9L

1490w

220v

2880

0.21

0.8

9L

20

430*205*450

1490w-15L

1490W

220V

2880

0.21

0.8

15L

22

480*205*485

1490w-30L

1490w

220v

2880

0.21

0.8

30L

25

540*240*510

1490W-50L

1490W

220V

2880

0.42

0.8

50L

36

680*300*560

1490W-120L

1490W

220V

2880

0.63

0.8

120L

44

930*370*680

1490W-160L

1490W

220V

2880

0.84

0.8

160L

65

1180*370*740

1800W-30L

1800W

220V

2880

0.26

0.8

30L

25

540*240*510

1800W-55L

1800W

220V

2880

0.52

0.8

55L

36

750*300*600

1800W-160L

1800W

220V

2880

0.78

0.8

160L

63

1200*370*750

1800W-200L

1800W

220V

2880

1.04

0.8

200L

84

1400*370*750

2000W-30L

2000W

220V

2880

0.26

0.8

30L

13

550*240*540

2000w-55L

2000W

220V

2880

0.52

0.8

55L

32

750*300*600

2000W-160L

2000W

220V

2880

0.78

0.8

160L

73

1080*350*750

2000W-200L

2000W

220V

2880

1.04

0.8

200L

80

1320*350*750

2200w-70L

2200W

220V

2880

0.52

1.0

70L

45

820*350*650

2200W-180L

2200W

220V

2880

0.78

1.0

180L

90

1350*400*850

2200W-220L

2200W

220V

2880

1.04

1.0

220L

105

1500*400*850

2200w-120L

2200w

380V

2880

0.52

1.0

120L

55

1200*350*760

2200W-180L1

220W

380V

2880

0.78

1.0

180L

90

1350*400*850

2200W*220L1

2200W

380V

2880

1.04

1.0

220L

105

1500*400*850

Company Profile

FAQ

1. why should you buy from us not from other suppliers?
Feida Mining Machinery Co., Ltd. has been researching and producing water well drilling rig, DTH drilling rig and supporting
equipment for 20 years.FY series products have the characteristics of high drilling speed, economy and low failure rate

2.what can you buy from us?
water Well Drilling Machine,Drilling Tools and Accessories,Screw Air Compressor

3. How can we guarantee quality?
Always a pre-production sample before mass production;always final inspection is done before shipment;and our main unit has a one-year warranty, during which all damaged accessories can be replaced with new ones. We provide machine installation and operation videos.

4.Can you do OEM for me?
We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.

5.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in ZheJiang ,China.

6.Do you have any certificates for your machine?
All of our products coming with the certificates of CE,ISO9001.

7. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,EUR,CAD,AUD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Technical Support
Warranty: 6 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Angular
Customization:
Available

|

air compressor

Are There Specific Filtration Requirements for Oil-Free Compressors?

Yes, oil-free compressors have specific filtration requirements to ensure the quality and purity of the compressed air output. These filtration requirements are designed to address the unique characteristics of oil-free compressors and the potential contaminants that can be present in the intake air. Here’s a detailed explanation of the specific filtration requirements for oil-free compressors:

1. Pre-Filtration:

Pre-filtration is the first stage of filtration in oil-free compressors and is designed to remove larger particles, such as dust, dirt, and debris, from the intake air. These particles can enter the compressor and cause damage to internal components or affect the performance of downstream filtration stages. Pre-filters typically consist of pleated or mesh filters that capture particles of various sizes. The efficiency of pre-filters is usually specified in terms of their particle size removal capability, such as 5 microns or 10 microns.

2. Coalescing Filtration:

The coalescing filtration stage in oil-free compressors is responsible for removing smaller particles and coalescing water vapor into droplets for subsequent removal. This stage is crucial in ensuring that the compressed air remains free from fine particles and moisture, which can cause contamination and corrosion issues. Coalescing filters are designed with special media that capture and combine small particles and water droplets, allowing them to be easily separated from the compressed air. The efficiency of coalescing filters is typically specified in terms of their particulate removal capability and moisture removal efficiency, such as 0.01 microns and 99.9% respectively.

3. Activated Carbon Filtration:

Activated carbon filtration is often employed as a final stage in the filtration process of oil-free compressors. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons that might have bypassed the previous filtration stages. These filters contain activated carbon granules with a high surface area, allowing them to adsorb and trap odor-causing compounds and trace amounts of oil vapor. The efficiency of activated carbon filters is typically specified based on their odor removal capacity and oil vapor adsorption capacity.

It’s important to note that the specific filtration requirements for oil-free compressors may vary depending on the application and the desired air quality standards. Industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting often have more stringent filtration requirements to meet their specific air purity needs. In such cases, additional filtration stages, such as sterile filters or high-efficiency particulate air (HEPA) filters, may be incorporated to achieve the desired level of air quality.

Complying with industry standards and guidelines, such as ISO 8573, can provide guidance on the appropriate filtration requirements for oil-free compressors. These standards define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture, and can help determine the necessary filtration stages and their efficiency ratings.

By implementing the appropriate filtration requirements, oil-free compressors can ensure that the compressed air produced is clean, dry, and free from contaminants, meeting the specific air quality needs of various applications.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

Are Oil-Free Air Compressors More Environmentally Friendly?

Oil-free air compressors are considered more environmentally friendly compared to oil-lubricated air compressors. These compressors offer several features and advantages that contribute to their eco-friendly nature. Here’s a detailed explanation of why oil-free air compressors are considered more environmentally friendly:

1. Elimination of Oil Contamination:

One of the significant environmental benefits of oil-free air compressors is the elimination of oil contamination in the compressed air system. Oil-lubricated compressors require oil for lubrication, which can potentially leak or contaminate the compressed air. Oil contamination can have adverse effects on downstream equipment, processes, and the environment. In contrast, oil-free air compressors operate without oil, ensuring clean, oil-free compressed air and eliminating the risk of oil contamination.

2. Reduction of Oil Spills and Leaks:

Oil-lubricated compressors have a higher risk of oil spills or leaks due to the presence of lubricating oil in the system. Oil spills can have severe environmental consequences, polluting soil, water bodies, and ecosystems. Oil-free air compressors eliminate the risk of oil spills or leaks, as there is no oil used in the compression process. This reduces the potential harm to the environment and minimizes the need for costly cleanup efforts.

3. Energy Efficiency:

Oil-free air compressors can be more energy-efficient compared to oil-lubricated compressors. The absence of oil in the compression chamber reduces internal friction and mechanical losses, resulting in improved energy efficiency. Energy-efficient compressors consume less electricity, leading to reduced energy consumption and lower greenhouse gas emissions. By using oil-free compressors, businesses can contribute to energy conservation and environmental sustainability.

4. Lower Environmental Footprint:

Due to the elimination of oil-related maintenance tasks, such as oil filtration, oil changes, and oil disposal, oil-free compressors have a lower environmental footprint. These maintenance activities associated with oil-lubricated compressors require the use of resources and generate waste, including used oil and oil filters. By using oil-free compressors, the consumption of resources and the generation of hazardous waste are reduced, contributing to a more sustainable and environmentally friendly operation.

5. No Oil Contamination in Air Tools and Products:

Oil contamination in compressed air can have detrimental effects on air tools, pneumatic equipment, and end products. Oil-free air compressors ensure that the compressed air delivered to these devices is clean and oil-free. This helps maintain the performance and longevity of air tools and prevents oil-related product defects. By using oil-free compressors, businesses can avoid costly repairs or replacements of equipment and minimize the risk of producing non-conforming or defective products.

It’s important to note that while oil-free air compressors offer environmental advantages, they may have certain limitations and considerations. These include the need for specialized maintenance, potential higher operating temperatures, and reduced maximum operating pressures compared to oil-lubricated compressors. Therefore, it’s essential to evaluate the specific requirements of the application and consider the trade-offs between environmental benefits and operational considerations when choosing an air compressor.

China factory 2000W*4 200L Oil-Free Silent 4-Piston AC DC Electric Portable Oil-Free Industrial Air Compressor   wholesaler China factory 2000W*4 200L Oil-Free Silent 4-Piston AC DC Electric Portable Oil-Free Industrial Air Compressor   wholesaler
editor by CX 2024-04-02